|
OXYGEN | ICSC: 0880 |
Oxygen, refrigerated liquid (cylinder) O2 Molecular mass: 32.0 RTECS # RS2060000 ICSC # 0880 UN # 1073 EC # 008-001-00-8 |
TYPES OF HAZARD/ EXPOSURE |
ACUTE HAZARDS/ SYMPTOMS |
PREVENTION |
FIRST AID/ FIRE FIGHTING |
FIRE |
Not combustible but enhances combustion of other substances.
Many reactions may cause fire or explosion.
Heating will cause rise in pressure with risk of bursting.
|
NO open flames, NO sparks, and NO smoking.
NO contact with flammable substances.
NO contact with fuels and other combustible materials.
|
In case of fire in the surroundings: all extinguishing agents allowed.
|
EXPLOSION |
Risk of fire and explosion on contact with combustuble materials such as oils or fats.
|
|
In case of fire: keep cylinder cool by spraying with water.
Combat fire from a sheltered position.
|
EXPOSURE |
|
|
|
|
Burning sensation.
|
|
Fresh air, rest.
Refer for medical attention.
|
|
Pain.
Serious frostbite.
ON CONTACT WITH LIQUID: FROSTBITE.
|
Cold-insulating gloves.
Protective clothing.
|
ON FROSTBITE: rinse with plenty of water, do NOT remove clothes.
Refer for medical attention.
|
|
Redness.
Pain.
Severe deep burns.
|
Safety goggles,
face shield.
|
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
|
|
|
|
|
SPILLAGE DISPOSAL | STORAGE | PACKAGING & LABELLING | ||
Evacuate danger area!
Consult an expert!
Ventilation.
Do NOT absorb in saw-dust or other combustible absorbents.
NEVER direct water jet on liquid.
|
Fireproof.
Separated from
combustible and reducing substances.
Cool.
|
Special insulated cylinder.
O symbol R: 8-34 S: 21 UN Hazard Class: 2.2 |
||
SEE IMPORTANT INFORMATION ON BACK | ||||
|
|
OXYGEN | ICSC: 0880 |
I M P O R T A N T D A T A |
| |||
PHYSICAL PROPERTIES |
| |||
ENVIRONMENTAL DATA |
|
|||
NOTES | ||||
Immediate administration of an appropriate spray, by a doctor or a person authorized by him/her, should be considered.
Do NOT use in the vicinity of a fire or a hot surface, or during welding.
Turn leaking cylinder with the leak up to prevent escape of gas in liquid state.
Also consult ICSC # 0138.
|
ADDITIONAL INFORMATION | |||||
|
|
||||
|
|